Caring Beyond Our Products
Caring Beyond Our Products
Home News Products Contents Contact us Company Information
 |
Elaso
AG was founded in 1967. Their expertise in electronics as well as mechanical
engineering manifests in their products. Driver types offered are
semi-automatic drivers and
fully automatic
drivers for
cylindrical grinding machines. This is how
you benefit
using ELASO AG drivers. |
 |
Center Grip CG130, CG165, CG200, CG275 For reliable and effective work piece driving during grinding between dead or live centers. Morse taper mounted units fitting most grinders. A secure self-locking work piece grip is generated by the jaw's shape. Floating retained driver jaws guarantee a high quality run out accuracy. Jaws will close on part when work head starts turning. Jaws open either with residual head energy or by changing work head turning direction. |
| Data - sizes in mm (") | CG130 | CG165 | CG200 | CG275 |
| Minimum machine center height | 100 (3.94) | 100 (3.94) | 130 (5.12) | 175 (6.89) |
| Body diameter | 130 (5.12) | 165 (6.5) | 200 (7.87) | 275 (10.83) |
| Body Length | 60 (2.36) | 75 (2.95) | 80 (3.15) | 108 (4.25) |
| Maximum work head speed rpm | 400-600 | 300-500 | 200-400 | 100-300 |
| Clamping diameter range | 4.9 - 20mm | 7.5 - 42mm | 40.5 - 86mm | 60 - 110mm |
| Clamping diameter range | .193" - .787" | .295" - 1.654" | 1.594" - 3.386" | 2.362" - 4.331" |
| Clamping jaw set (3 jaws) | 5 | 7 | 7 | on request |
| Center Morse taper | 3 / 4 | 3 / 4 / 5 | 4 / 5 | 5 (6) |
| Run-out accuracy, dead center, µm | 3-5 | 3-5 | 4-6 | 5-7 |
 |
Auto Grip
AG3, AG6 For reliable and effective work piece driving during grinding between dead or live centers. For fully automatic loading and unloading of grinders. Jaw's are spring closed and air released. Morse taper mounted units fitting most grinders. A secure self-locking work piece grip is generated by the jaw's shape. Floating driver jaws guarantee a high quality run out accuracy. The AG3/40 is an extended version allowing to grab parts further in (behind splines or threaded shaft ends). |
| Data - sizes in mm (") | AG3 | AG6 |
| Minimum machine center height | 60 (2.36) | 60 (2.36) |
| Body diameter | 115 (4.53) | 115 (4.53) |
| Body Length | 76.5 (3.01) | 76.5 (3.01) |
| Maximum work head speed rpm | 400 >400 cooling | 400 >400 cooling |
| Clamping diameter range | 10-50 (.394-1.969) | 37-50 (1.457-1.969) |
| Clamping jaw set (3/6 jaws) | 3 (3) | 1 (6) |
| Center Morse taper | 3 / 4 / 5 | 3 / 4 / 5 |
| Runout accuracy with dead center µm | 2-4 | 2-4 |
 |
SM40-120 Especially made for large grinding machines with Morse taper #5 or #6, for fully automatic loading and unloading of parts ranging from 40mm (1.6") to 120mm (4.7") in diameters. Air pressure closes the jaws to part diameter and locks the slides. Jaws work with self-locking principle adjusting pressure according to torque exerted by the part through the grinding force. Driver diameter 400mm (15.75") and approximately 250mm (10") long. |
- Manual or automatic loading
- Efficient work piece change
- Eliminates grinding dogs
- Increases machine output
- Reduces machining time
- Lowers production cost
- Increases workplace safety
- Low maintenance
Home News Products Contents Contact us Company Information